This Blog was posted by Smithson Valley Services Air Conditioning Repair. We serve the Texas Hill Country, including Blanco | Bulverde | Canyon Lake | Fisher | Kendalia | New Braunfels | North San Antonio | Sattler | Sisterdale | Smithson-Valley | Spring Branch | Startzville
AC Services – Troubleshooting
If you are looking for quick fixes to troubleshoot common air conditioner problems, then you certainly came to the right place. This article will present you with simple air conditioner repair solutions that you can do on your own. But of course, it is still highly advised that you seek help from certified and qualified technicians to ensure that your AC emergency will be dealt with accordingly. In this regard, here are some of the common types of air conditioning problems you are likely to encounter and their respective solutions. More about Ac Repair & Services Spring Branch, Tx here
Foul Smelling Air From The AC
If your air conditioner produces a foul smell or odor every time you use it, you certainly want to know what is causing this. Well, basically, moisture tends to build up within the unit. And if you do not clean your unit regularly, then stagnant water may have already accumulated inside. This is the perfect breeding ground for fungi, molds and mildew, which causes the awful smell. The best solution for this problem is to keep your AC unit clean at all times by changing its filter as instructed by the manufacturer. Also, be sure that your air conditioner is draining water properly to avoid accumulating water from within the unit.
Humming Air Conditioner That Does Not Blow Air
This is yet another common problem with air conditioning units. The humming sound usually originates from a seized motor or compressor. Most of the time, they create a buzzing or clicking sound rather than a hum, but this still calls for a thorough inspection. If this is the case, you need to replace the faulty component so that the AC unit will start blowing air again.
The Fan is Running, But No Cold Air Comes
For this problem, you have to check the thermostat setting of the unit. Also, you have to listen if the compressor is making unnecessary noises. If it does not, check to see if the AC coils are clean and free of all kinds of debris. If you have inspected every possible cause and everything seems to be working fine, the refrigerant might be the problem. If the motor is running but the unit is not producing cold air, then chances are the refrigerant is already critically low. Never attempt to carry out repairs on your own as this might void the warranty of the unit. That said, it is better if you bring it to the customer service center of the unit manufacturer. Or, allow a repair service person appointed by the manufacturer to check the unit.
Reduced Cooling Efficiency
If the AC is running properly but cannot cool the room efficiently, the problem would be a dirty filter or an appropriately sized AC unit. Perhaps you have bought a unit that is too small for the room where it is installed. If this is the case, then the air conditioner won’t be able to cool the entire room as it should. The solution to this kind of problem is to buy a unit that is appropriate for the size of the room where it will be placed. Meanwhile, if the problem is a dirty filter, all you have to do is clean it or replace it with a new one as necessary to bring back the unit to its peak cooling performance.